Ammonit
ammonit remotesensing
Latest Remote Sensing technology
for accurate measurements and high data availability

Remote Sensing Systems for Wind Measurement

Remote sensing systems have become more and more popular in the wind industry as a supplement to the traditional met mast. Remote sensing systems can be applied to complement a wind site assessment campaign or for wind farm monitoring. The systems measure the wind conditions from the ground up to a height of 200 meters. Thus the wind speed and wind direction up to rotor blade tip-height or for the whole rotor blade area can be used to calculated the wind energy yield forecast. There are two types of remote sensing systems on the market: SoDAR (Sonic Detection and Ranging) and LiDAR (Light Detection and Ranging). SoDAR instruments measure the wind conditions by means of sound; LiDAR instruments use light to measure the wind characteristics. LiDAR systems can also be installed in top of a wind turbine to measure wind conditions in front and behind the turbine.

SoDAR and LiDAR devices have to be properly supplied with sufficient power. Recommended power supply systems are listed below the SoDAR and LiDAR devices or click here.

 

Lidar ZX 300

LiDAR-ZX300

N° de commande:
S96110 (DC supply)
S96120 (AC supply)

Classified according to IEC 61400-12-1:2017. According to DNV GL, ZX 300 is accepted for use in bankable wind speed and energy assessments in simple terrain.

3 years warranty with complete suppport as well as 3-year service interval for unbroken wind measurement campaigns of up to 3 years.

High data availability in all heigts due to Continuous Wave Technology

  • Measurement principle: LiDAR (Light Detection and Ranging)
  • Measurement range: 10 ... 200 m (up to 10 height measurements - configurable)
  • Wind speed: 0 ... 80 m/s
  • Accuracy (horizontal wind speed): 0.1 m/s
  • Accuracy (wind direction): < 0.5°
  • Optional monitoring of measurement campaigns with AmmonitOR

Téléchargement

FicheTechnique

ZephIR Care

AmmonitOR-FTP-Service

RepeatabilityOfPerformance

Sodar AQ System AQ510 wind finder

Ammonit Sodar AQ510

N° de commande:
S91110 (AQ510 Wind Finder)
S91410 (Warm winter kit power supply system)
S91420 (Mild winter kit power supply system)
S91430 (Cold winter kit power supply system)

First SoDAR with full classification acc. to IEC 61400-12-1:2017!

Latest SoDAR technology to measure wind conditions up to a height of 200 m with a 5 m resolution and low power consumption of only 30 W. Integrated GPS module as well as tilt sensor for easy deployment.

  • Measurement principle: SoDAR(Sonic Detection and Ranging)
  • Measurement range: 40 ... 200 m (resolution 5 m)
  • Wind speed: 0 ... 30 m/s
  • Accuracy horizontal wind speed: ± 2% (for wind speeds above 4 m/s compared to a cup anemometer in flat terrain)
  • Accuracy wind direction: < 5°
  • Total power consumption: 30 W

Télechargement

FicheTechnique

VerificationReport(BBB)
VerificationReport(DNV-GL)
VerificationReport(Ecofys)

Classification report by DNV GL available on request.

AQPower - Stand-Alone Power Supply System
aqpower 220x165

N° de commande
M58200 (AQPower)
M58280 (Terminal box for met mast)
M58290 (Customized trailer)

Stand-alone power supply system consisting of diesel generator and solar modules. Integrated diesel heater. Remote control and monitoring.

  • Output voltage: 24 VDC (optional 12 VDC)
  • Max. output power: 600 W
  • Battery: 2x 200 Ah
  • Operating temperature: -40 ... 60 °C
  • Diesel generator power: 3.5 kW
  • Dimension [LxWxH]: 2.2 x 1.4 x 1.5 m
  • Weight: approx. 700 kg (empty fuel tank)

Téléchargement

FicheTechnique

Fuel Cell Power Supply Box for LiDAR devices
fuelcellbox 220x260

N° de commande:
M58550

Stand-alone power supply system with fuel cell and solar modules. Remote control and monitoring. Folded solar modules for easy and fast start-up.

  • Output voltage: 24 VDC
  • Max. output power: 350 W
  • 2 solar modules à 260 W
  • EFFOY fuel cell techology
  • Battery: 440 Ah
  • Removable battery bank (260 kg) for transport
  • Dimensions [LxWxH]: 1.40 x 0.90 x 1.00 m
  • Weight: approx. 650 kg

Téléchargements

FicheTechnique

Fuel Cell Power Supply Trailer System for LiDAr Devices
meventus fuelcell 220x203

N° de commande:
M58600

Stand-alone power supply system with fuel cell and solar modules. Remote control and monitoring. Space for a LiDAR device inside the trailer.

  • Output voltage: 24 VDC
  • Max. output power: 200 W
  • Battery: 440 Ah
  • Operating temperature: -40 ... 60 °C
  • Dimensions [LxWxH]: 3.78 x 1.81 x 2.11 m
  • Weight: approx. 850 kg

Téléchargements

FicheTechnique

Actualités-Produits

AmmonitOR, notre plateform en ligne,  permet une meilleure gestion de vos données de mesure, où que vous soyez dans le monde, et quand vous le désirez.
plus

Notre équipe de vente

Avez-vous des questions sur nos produits ou systèmes de mesure? Contactez notre équipe de vente:

E: Cette adresse e-mail est protégée contre les robots spammeurs. Vous devez activer le JavaScript pour la visualiser.
T: +49-30-6003188-0

Support

Technical questions?
Please contact our support team:

E: Cette adresse e-mail est protégée contre les robots spammeurs. Vous devez activer le JavaScript pour la visualiser.
T: +49-30-6003188-0

 

Contact Partenaires

Contactez le partenaire de votre choix
Contact Partenaire