Ammonit
ammonit remotesensing
Latest Remote Sensing technology
for accurate measurements and high data availability

Remote Sensing Systems for Wind Measurement

Remote sensing systems have become more and more popular in the wind industry as a supplement to the traditional met mast. Remote sensing systems can be applied to complement a wind site assessment campaign or for wind farm monitoring. The systems measure the wind conditions from the ground up to a height of 200 meters. Thus the wind speed and wind direction up to rotor blade tip-height or for the whole rotor blade area can be used to calculated the wind energy yield forecast. There are two types of remote sensing systems on the market: SoDAR (Sonic Detection and Ranging) and LiDAR (Light Detection and Ranging). SoDAR instruments measure the wind conditions by means of sound; LiDAR instruments use light to measure the wind characteristics. LiDAR systems can also be installed in top of a wind turbine to measure wind conditions in front and behind the turbine.

SoDAR and LiDAR devices have to be properly supplied with sufficient power. Recommended power supply systems are listed below the SoDAR and LiDAR devices or click here.

 

Lidar ZX 300

LiDAR-ZX300

订购号:
S96110 (DC supply)
S96120 (AC supply)

Classified according to IEC 61400-12-1:2017. According to DNV GL, ZX 300 is accepted for use in bankable wind speed and energy assessments in simple terrain.

3 years warranty with complete suppport as well as 3-year service interval for unbroken wind measurement campaigns of up to 3 years.

High data availability in all heigts due to Continuous Wave Technology

  • Measurement principle: LiDAR (Light Detection and Ranging)
  • Measurement range: 10 ... 200 m (up to 10 height measurements - configurable)
  • Wind speed: 0 ... 80 m/s
  • Accuracy (horizontal wind speed): 0.1 m/s
  • Accuracy (wind direction): <0.5°
  • Optional monitoring of measurement campaigns with AmmonitOR

下载

数据表

ZephIR Care

AmmonitOR-FTP-Service

RepeatabilityOfPerformance

Sodar AQ System AQ510 wind finder

Ammonit Sodar AQ510

订购号码:
S91110 (AQ510 Wind Finder)
S91410 (Warm winter kit power supply system)
S91420 (Mild winter kit power supply system)
S91430 (Cold winter kit power supply system)

First SoDAR with full classification acc. to IEC 61400-12-1:2017!

Latest SoDAR technology to measure wind conditions up to a height of 200 m with a 5 m resolution and low power consumption of only 30 W. Integrated GPS module as well as tilt sensor for easy deployment.

  • Measurement principle: SoDAR (Sonic Detection and Ranging)
  • Measurement range: 40 ... 200 m (resolution 5 m)
  • Wind speed: 0 ... 30 m/s
  • Accuracy horizontal wind speed: ±2% (for wind speeds above 4 m/s compared to a cup anemometer in flat terrain)
  • Accuracy wind direction: <5°
  • Total power consumption: 30 W

下载

数据表

VerificationReport(BBB)
VerificationReport(DNV-GL)
VerificationReport(Ecofys)

Classification report by DNV GL available on request.

AQPower - Stand-Alone Power Supply System
aqpower 220x165

订购号码:
M58200 (AQPower)
M58280 (Terminal box for met mast)
M58290 (Customized trailer)

Stand-alone power supply system consisting of diesel generator and solar modules. Integrated diesel heater. Remote control and monitoring.

  • Output voltage: 24 VDC (optional 12 VDC)
  • Max. output power: 600 W
  • Battery: 2x 200 Ah
  • Operating temperature: -40 ... 60 °C
  • Diesel generator power: 3.5 kW
  • Dimension [LxWxH]: 2.2 x 1.4 x 1.5 m
  • Weight: approx. 700 kg (empty fuel tank)

下载

数据表

Fuel Cell Power Supply Box for LiDAR devices
fuelcellbox 220x260

订购号码:
M58550

Stand-alone power supply system with fuel cell and solar modules. Remote control and monitoring. Folded solar modules for easy and fast start-up.

  • Output voltage: 24 VDC
  • Max. output power: 350 W
  • 2 solar modules à 260 W
  • EFFOY fuel cell techology
  • Battery: 440 Ah
  • Removable battery bank (260 kg) for transport
  • Dimensions [LxWxH]: 1.40 x 0.90 x 1.00 m
  • Weight: approx. 650 kg

下载

数据表

Fuel Cell Power Supply Trailer System for LiDAR DEvices
meventus fuelcell 220x203

订购号码:
M58600

Stand-alone power supply system with fuel cell and solar modules. Remote control and monitoring. Space for a LiDAR device inside the trailer.

  • Output voltage: 24 VDC
  • Max. output power: 200 W
  • Battery: 440 Ah
  • Operating temperature: -40 ... 60 °C
  • Dimensions [LxWxH]: 3.78 x 1.81 x 2.11 m
  • Weight: approx. 850 kg

下载

数据表

產品新聞

Benefit from our online platform AmmonitOR (Ammonit Online Report). AmmonitOR simplifies your data archiving and data management. With AmmonitOR you can access, monitor and analyse your measurement data conveniently at all times, wherever you are. Register today and send us an email at: Email住址會使用灌水程式保護機制。你需要啟動Javascript才能觀看它 . Our service team will set up your personal account.
阅读全文

产品-联系

我们的产品或测量系统有问题?请联系我们的销售人员:

E: Email住址會使用灌水程式保護機制。你需要啟動Javascript才能觀看它
T: +49-30-6003188-0

支持

Technical questions?
Please contact our support team:

E: Email住址會使用灌水程式保護機制。你需要啟動Javascript才能觀看它
T: +49-30-6003188-0

 

伙伴联絡

联系一个你选择的合作伙伴
合作伙伴联系人