Chapter 15. Release Notes

Data exports data file delivery was in some cases not working. Affected were FTP and also email.

Further balance changes are applied to data import mechanism.

Minor bug fixes in plots.

Data import balance changes.

Bug fixes in plots, data imports and data export API.

Internal modernisation.

Minor bugfixes in Ammonit Live Data Aggregator support, plots, statistics and Meteo-32 file support.

Performance optimisations.

Minor bugfixes in Ammonit Live Data Aggregator support, plots, file deletion, data import and UI.

Minor bugfixes in analysis, plots, reports, import and UI.

Minor bugfixes in analysis, plots, reports, import and custom evaluations.

Performance optimisations.

Database modernisation cleanups.

Database modernisation.

Configuration's table is ordered by evaluation type.

General bugfixes and improvements.

Project name is now displayed in the header.

Meteo Laser V4 support is added.

General bugfixes to filter copy, file delete and data import.

General bugfixes to matrix, cache and UI.

General bugfixes to matrix, cache, data deletion and reports.

General bugfixes to matrix, cache and reports.

General bugfixes to reports, data deletion and evaluation cache.

Evaluation Cache was not updated at all. That is fixed now.

Some reports might not have been generated do to a bug, how filter matches where fetched.

It appeared that default measurement rate of a few modbus setups, were not correctly fetched by completeness calculation. The default of 600 was applied, so it happened that measurement rates of e.g. "1/2 s" lead to a completeness of 200%. That is fixed now.

Minor bug fixes in advanced logbook search, METEO32 data import, completeness calculation.

Week's Review provides a full overview of evaluation's daily completeness for the current week.

Matrix view is now more focused on current data. Outdated data (last import > 30 days old) is moved to it's own Matrix view.

Filters: If a device is moved or deleted, the filters in the related project will be updated.

Logbook view provides a advanced search. With advanced search all logbook entries can be lookuped within a given timerange or even in all available entries. It is a full text search.

Solar evaluation names are unified to better reflect the naming in the Meteo data loggers.

Signature files of imported data files are displayed correctly in data file detail view.

Minor bugfixes in week's review, dynamic plot, data import, filter copy, configuration overrides and ftp import.

AmmonitOR support button leads direct to Ammonit's support plattform. This is a directer way to report issues with AmmonitOR and you have also better control and oversight over the reported ticket.

Filters: A bug was cleared, what caused that already from project removed devices, where still in the filer instances to find. This will be automatic cleaned up and noted in the journal as automatic messsage.

Filters: If an evaluation is deleted, it will be automatic removed from filter instances. Was the evaluation crutial for the filter to work, the filter will be disabled. If that is the case, it will be noted in the journal.

Occurrency polar plot showed not all ticks in the sector between 345° and 15°. Also it had an additional selectable evaluation field, what had no effect, that was removed.

Minor bugfixes to reports and template of config page.

Legal notes are added to AmmonitOR interface.

For custom instances of AmmonitOR it is now possible to customise header and default logos.

For custom instances of AmmonitOR it is now possible to customise imprint, about and legal notes.

Configuration detail page displays more explicit the config ID as well as the actual config creation date on AmmonitOR.

Configuration detail page is displayed in a more compact way and adapts nicely to different sized screens.

Configuration detail page: Related data files are displayed in different views to improve readability. Also the expired data files are displayed seperately now.

Minor bugfixes on Filter messages, reports, plots and download of data exports.

Campbell parser is now customisable due to the very flexible TOA5 format. Column names of evaluations can be assigned to evaluation types. This config can be copied to other campbell devices. One config can also support multiple devices with different evaluation naming patterns in their columns.

Bugfixes in data logger and UI.

Bugfixes in data exports, reports , plots and journal custom messages.

Custom server settings are allow to set a custom noreplay email address.

Bugfixes UI.

Connection log: "SCP" has been renamed to "CSV file upload".

New API data export format: Ministry of Energy (Saudi Arabia) JSON format is introduced.

A new direct method of downloading export files via API is introduced for the JSON export formats. It provides the JSON content straight to the response.

Minor bugfixes for Meteo-CSV export format, wind direction plot, average polar plot, height profile plot and reports.

MeteoCSV export includes from AmmonitOR generated new evaluations and puts them into footer.

Bugfix full config files import, filter views

Data Export: a new format called MeteoCSV is introduced. MeteoCSV provides a classic Meteo40/42 datafile plus footer, but generated from AmmonitOR database. This format is limited to daily period and generates one file per existing config. Config overrides applied through AmmonitOR are taken into account.

Custom messages can now be added to journal.

Add all raw data files export.

Bugfixes to data file bulk delete and logbook.

Bugfix automatic export send-off of non-primary data.

Data snapshots can now be exported.

Minor bugfixes in Dynamic XY plot, data files view.

Logic Controller rules are now displayed in logbook view.

Manual import of all the data file types is now possible.

Bugfix the visual bug in XY plot where the lines were incorrectly aligned.

Bugfix bulk delete of non-primary data files.

Data snapshot files are now listed in the data file section.

Data file overview monthly bulk delete provides a selection form, where you can select and deselect the files, who should be deleted.

Alarms and filters can be now sent to your live data account.

Once click project with logger creation from the UI level of the Meteo-40 Plus and Meteo-42 devices supported.

Various security improvements.

Visual bug fixes in dynamic XY plot and sensor models.

Performance optimisations.

It is no longer possible to create an account for Ammonit Live Data Dashboard through AmmonitOR interface.

Report detail view got a small re-design. Latest 10 reports are listed. The other reports can be accessed through archive folders sorted by year.

Deprecate multiple comments on journal entries.

Bugfixes in API.

Added new plots for soiling kits to display soiling ratio and soiling loss index. Three plots are added in total. A simple XY plot focussed on soiling measurements and also some sepcific and more detailed plot overviews, where the mesured soiling parameters can be connected with the proper context.

AmmonitOR version number is moved to the footer.

Presets of Dynamic XY plot appear alphanumerical ordered.

Minor bugfixes in two-factor authentication, gust data parser, configuration overrides, plots and UI.

Bugfixes in the logger delete process and UI.

Data availability can now be displayed as monthly table or hourly averages under the statistic section.

TOTP (Time-based one-time password) authentication login is now available. It can be enabled in user access's settings.

Repair the bug where the configuration override has influenced the Count statistics.

Performance improvements in data import, data deletion and configuration override.

Non-primary data deletion is now fixed for the monthly bulks.

Reimport historical data button is fixed.

Minor Bugfixes in Reports, plots and UI

Improved navigation from AmmonitOR to Live Dashboard.

Custom project logo upload issues are resolved.

Line strength of XY plot is increased to improve readability.

Journal lookup performance improved.

Minor Bugfixes in Reports and UI

Project custom logo is now also displayed in project list.

Filter setup and usability is improved by an optimised evaluation selector.

Reports table management of long tables and long column names are improved. Column names over 21 characters are truncated to improve column and page size management.

Minor Bugfixes in Plot, UI and Data Exports.

Minor Bugfixes in Data Import, Plots and UI.

Projects allow uploading the custom logo.

Duplicated data model is now replaced by the default priority of the file with newer generation time. For non-Meteo devices, it takes import time into account. If the older file is to be preferred, the newer one needs to be deactivated.

Minor Bugfixes in Data Import, Data Exports, Plots, Reports and Filters.

Premium has been removed. All features are free of charge. Only certain data import formats are kept restricted. Restricted data imports is unique to devices like Zephir, AQS, Campbell and METEO-32. All credit accounts stay valid as they are. All bought credits stay valid as well as the already unlocked time periods of data.

Due to the new restricted data import mechanics data expires after 2,5 years in the database. After this period, they get automatically removed from database, but not from file system. With a simple "Please, reimport" button, you will be able to reimport the data in no time without further costs. This mechanic relates to all devices!

Under your user access profile not only the projects you have permissions to are displayed, but also all journal entries, created by your actions.

Filter matches are more distinced and displayed in Matrix.

Filter matches also get copied, if a device is moved from one project to another.

AmmonitOR links sensors now to related entries on ammonit.com

Matrix: To increase readability, the tables of devices and remote devices are split into two seperate tables.

Minor bugfixes in data exports, data imports, config management, plots, reports and UI.

Minor Bugfixes in Data Import, UI, Data Exports and performance.

Polar plots had issues to be displayed correctly. Especially reports of the week 26 were affected and might need an manual regeneration.

Minor Bugfixes in Data Import, API and UI.

Server system upgraded to Debian 12 Bookworm.

Performance improvements.

Minor Bugfixes in Data Import and UI.

The amount of different report types are limited to four per project.

XY plot: More than 3 Y-axes will now displayed properly. Also the frame was adjusted.

Data exports allow now selecting only channel values to be a part of the exported file for all formats except of the raw data file.

Data file deletion is not synchronous anymore. When a data file is being deleted it is now part of the queue system. After pressing the delete button, the file will be deleted after the current queue is resolved, which may result in the time delay.

Minor Bugfixes in Reports, UI, Plots, REST API and Data Import.

NEW: Dokument files (any format) can now be uploaded to AmmonitOR Projects for further documentation. 100MB in total can be uploaded. The file size is limited to 10MB each.

Data exports logs are better readable. Failed sent statuses are more distinct.

Extra long evaluation names (40+ characters) are now supported by Reports.

Bugfix: Dynamic XY graph showed unintuitive behaviour while clicking on the evaluations. That is fixed. Everyting behaves like intended.

The huge variation of solar evaluations are now better supported.

Minor Bugfixes in Reports, REST API, Data Export and Data Import.

Logger online connection network rx/tx transfer is displayed in connection log.

Data exports allow exporting all original data file types now (primary, secondary and tertiary statistics). Photos, gust, logbook and configuration files can also be exported.

API allows downloading of all original data file types now (primary, secondary and tertiary statistics). Gust, logbook and configuration files can also be downloaded via API.

Minor Bugfixes in dynamic plot, REST API, emails and UI.

Content of reports can now be customised. In detail it means that sections can be added, moved in position or removed. Existing default report formats can be edited. It is also possibel to name reports. Existing reports can be renamed.

Reports: Content is better organised and space management is improved.

Emails sent by AmmonitOR are now designed and have an HTML layout.

Device Files: Download button and Delete button are moved to the top.

Minor Bugfixes in plots, REST API and UI.

Minor Bugfixes in configuration overrides, plots, REST API, cache, UI and matrix.

Data availability is an evaluation of LiDAR devices and marks the quality of a data point, e.g. 10min average. In Matrix, Availability plot as well as in reports the data availability in case of a LiDAR device is filtered. Means averages of data availablity evaluations are set to zero, if the availability is below 80%. Data below 80% can't be used. Be aware that wind speed and wind directions or other who are not data availability evaluations are NOT filtered. Only for accesibility and overview purposes are the data availability evaluations filtered on the views mentioned above.

Cascading data logger broke the override logic, what is repaired.

Minor Bugfixes in UI for maps and usage with Safari browser.

Performance improvements to various views, data import, data export and filters.

Various bugfixes to live data, week's review, premium calendar configuration overrides, wind direction formula, Zephir files import, plots.

Bulk delete of secondary, tertiary, gust and logbook files is now possible.

Fix the Google Chrome incompatibility

Completeness calculation was not correctly shown for LiDAR or RS485 sensors. Completeness calculation for Meteo data logger bases on the measurement counts per second and the actual recorded data, who is available. LiDARs completeness calculation bases on the availability of data evaluation and the actual recorded data, means not available data is counted in correctly.

Browser tabs show now the project name as title.

Various bugfixes to connection log, exports, RS485 channels, completeness calculation, matrix and UI.

Coniguration override allows you to preview the status of it's execution in an extra view.

Reports allow to set a custom logo.

Browser Tab title shows now the project key first.

Automatic email will be sent after Reports are generated.

Minor bugfixes in reports, data analysis data export, live data and aligator.

Ammonit Live Data Aggregator profile configuration supports now profiles with multiple data loggers at once.

Minor bugfixes in reports, dynamic xy graph, data export, live data and aligator.

Reports: Correlation graphs for wind speed evaluations will only show two sensors per plot, not all in one like in the past. Criteria for the sorting algorithm is the hight of the sensor. Two wind speed evaluations with the lowest hight difference will be correlated and displayed in one graph.

Reports: Internal structure of report generation is optimised and reworked to prepare near future features like custom reports.

Rare synchronisation issues within Matrix are resolved. Matrix gets properly updated with every data import.

Completeness calendar displays the current data correctly even if there are just few data points.

Minor bugfixes in API, reports, dynamic xy graph, data export, live data and aligator.

Evaluation cache will be updated on every Data File import, which influences the Matrix view.

Data snapshot import is now able to import internal evaluations like "Internal Voltage, Internal Current, etc" with updated naming of Meteo40 Firmware 2.1.4.

Further bugfixes applied on reports, matrix view, config view and data exports.

General performance improvements of page loading speed.

Firmware version of Ammonit data loggers are displayed in device details section.

Connection Log's visual timezone problems are solved.

Minor bugfixes dynamic XY, band graph, data import, data export and aligator.

DynoXY graph got an visual update.

Minor bugfixes in connection log, data export, live data, data import and reports.

Minor bugfixes in data import, data export, plots, API and UI.

Software modernisation upgrade.

Minor bugfixes in data import, dynamic xy plot and data export.

Dynamic XY presets got some bugfixes and an Name-edit function.

Minor bugfixes mainly for the UI and DataImport.

AmmonitOR gets slowly but surely a makeover. With this release we introduce first changes to the look of AmmonitOR.

Dynamic XY plot has a new preset feature. Creating presets allwos you to have different evaluation setups to switch through.

Data export's re-send function via logs forces the re-sends from now.

Connection Log displays connections, where no disconnect-trigger has arrived, correctly.

Minor Bugfixes for Reports, Plots and UI.

Filter schemas can be copied to other projects, if the user has write permissions to the target project.

DynoXY graph shows units in legend and mouse-over.

Snapshots show the correct timezone.

Performance improvements for premium months purchase was added.

Introduce support for the AmmonitLiveDashboard account management.

Introduce support for the Ammonit Live Data Aggregator profile management.

Several minor Bugfixes in reports, export logs, data files, data import, plots, MeteoLaser import and UI.

AmmonitOR custom installations have now the ability to add ssh key for each data logger via UI.

Performance improvements on several views, like project detail overview.

Several minor Bugfixes in API, overlapping data, plots, data import, data exports

There are no duplicated data file names in .zip files during direct download any more.

API download methods are logged into journal now.

Plots: Polar plot possible displayed sectors are limited to 72 instead of 144 temporarily, due to a third party package bug.

Bug related to missing logbook files (with their signatures) and full config files is fixed.

Minor bugfixes to plots, data files and data import.

Premium bulk subscriptions are now possible with new interface option.

Security improvements for the ftp/sftp exports UI.

API provides a method for fetching the connection log.

Adding new wind turbine to the database is possible again and works like expected.

Data Export: The PGP fingerprint is now displayed fully.

Data files: Delete month of data function works now like expected.

Minor bugfixes to Data Import, Plots, Data Export, Filters, Data Analysis table.

The filtering for empty fields, like "N/A", "None", "NaN" etc is now possible with Empty Data Filter.

Large data exports will no longer be presented via pickup stream. There is a more efficient way.

Premium accounts can be soft deleted, but will never purged from database.

Empty data filters are introduced to filter empty fields in data. NULL, None, n/a, NAN etc can be detected.

Data import parsers show more detail on potential erroneous elemets of the data file.

Minor Bugfixes in data import, premium and UI elements

General bugfixes to Wind Direction plot, connection alarms.

Minor bugfixes to ftp import, Zephir parser, MeteoLaser parser.

Meteo40A is now fully supported.

Data files can be deleted by month.

Wind turbine module had tamporarily issue with adding new turbines.

Minor Bugfixes in reports, dataexport, data import and plots.

Bugfixes to data export, data import, plots and views.

From now AmmonitOR is based on Python3.

Data Export: Pick up method was empty after the first subscriper downloaded the data. All subscribers can download the pickup data from now.

Matrix View: Pop ups are all closed if you click beside the table.

Data Import: Some restricted files could not be updated due to a bug.

Connection Alarms missed sometimes the connection datetime.

Journal displays if Period is missing in Configuration Overrides.

Minor Bugfixes in Journal, DataExport, Matrix, Reports and UI.

Editing of connection alarms bug fixed.

Bugfixes in data export, data import, filters, matrix view.

Minor UI changes in filters.

Twentyminutes interval file import are supported.

Minor bugfixing in UI and data import.

Problem with the update of the project status is solved.

Meteo40 sends diskriminators for certain evaluations. Affected are specifically MODBUS sensors, where one sensor sends many different evaluation outputs. AmmonitOR is now able to display them properly.

Minor bugfixing in data exports, data imports and UI.

Matrix: If there are over 100 devices in the system you have access to, adding devices to matrix was diffcult due to the huge loading times. Pagination solved this issue.

Several fixes to caching mechanics.

Matrix view is introduced to dashboard as overview over all active devices in the system the user has access/read permissions to. The devices has to be enabled first and can also be disabled again.

Several UI fixes for evaluations, data export, premium basket.

Matrix view stays still in beta to sort out all major problems first.

Matrix view has to be enabled over Project settings.

Matrix view: The evaluation cache is only updated by upload of new data. If files are uploaded more than once an hour, the cache is only updated once per hour.

Matrix view: Fixed visual bugs and minor functionality bugs.

Matrix view: Parallel processing highway for caching.

Matrix view beta will be released later this release.

Minor bugfixes in reports, plots and data exports.

Minor bugfixes in displaying decimal places for slope on offset.

Python Decimal datatype (string based) is migrated to float datatype for performance reasons and because it is the standard datatype in meterology and science.

Minor bugfixes in DataExport and DataImport.

Signature files are now attached to data files and are also displayed in Device Files section.

Solar report displays Albedo values if set up.

Dynamic XY deals better with solar evaluations.

Connection Alarms show the subscriptions now.

Minor bugfixes in Plots, Reports and Data import parser.

The reimport of payed datafiles had issues, which are now resolved.

Minor issues fixed in Overlapping data files and configuration view.

Problems in filter messages are cleaned up and from now they are properly sent.

Example project page is accessable again.

Data exports module sends to every recipient the datai export with gpg-signature.

Internal structure improvements.

Minor bugfixes to data exports, reports and UI.

Dynamic-XY has an additional slot to display extra evaluation.

Performance improvements and optimized data importi were applied.

Minor bugfixes to API, plots, reports and UI.

Photos naming is now bulletproof.

Configuration list shows all data again.

Minor bugfixes to plots and UI.

It is now possible in Correlation Profile to pick explicitly a evaluation for x-axis (Abscisse) and y-axis (Ordinate).

Timezone is displayed in plots, with a time reference. Timezone is also shown in many other places for orientation.

Data Export form is fully working again.

Many tiny UI improvemens are applied.

Minor bugfixes to plots and data overview page.

Data files were not downloadable in Data File section.

Download of data files through web API was blocked for a while. Now everything should work like expected.

Missing plot images in reports are fixed. Please re-generate manually reports were plot images are missing.

Completeness calendar performance is improved and duplicate file entries are correctly displayed.

Minor bugfixes to plots and UI.

Minor bugfixes to completeness calendar, reports, data import, plots, API and UI.

Completeness calendar is reworked, taking Duplicated Entry into account now.

More information about import sessions and additional types of files is displayed in Device Files section.

Minor bugfixes to data exports, plots, evaluations, API and UI.

AmmonitOR runs now under Debian 9.0 (Stretch) system instead of Debian 8.0 (Jessie), increasing it's security, performance and reliability.

Templates are now running under jinja2 template engine instead of default django template engine, improving their reliability and performace.

Some minor bugfixes in all AmmonitOR features.

Data Export: Under certain circumstances a problem occured, that a data export was just send to the first subscriber. From now on the data export is sent to all subscribers.

One of the overlapping files were shown as empty, that is resolved.

Impressum link is working again.

The data export of original data works again for none-premium data months.

Some minor bugfixes in API, data export, data import and UI

New evaluation sets are supported, like Soiling, Albedo, Variance and many more.

Fixed some issues with duplicate data entries.

Project comments are included into reports Standard and Detailed.

Problematic data files with to long evalutaion names can be detected and displayed why they are not imported.

Some minor bugfixes in data exports, dynamic-xy and general UI.

All avaliable full configuration files are now shown, instead of incorrectly assigned signature files.

Export emails are now sent to every single recipient on the list, instead of just first one.

Restricted files are displayed in section Archiving > Device Files.

Tunnel connections are updated every minute in View Monitoring > Devices.

Many minor bugfixes in data imports.

Without premium subscription the data files of Meteo-32, AQS devices, Zephir devices and Campbell data loggers are not imported to AmmonitOR database and the full feature set of AmmonitOR is not usable. They are saved in the section Archive > Device Files > Restricted Files until the premium feature set is enabled, in that case the data files will be fully imported.

SFTP exports worked insufficient, we solved the issues.

Premium months are fully imported after transaction, it appeared in the past that was not always the case and needed a manual re-trigger.

Filter emails are sent again after some issues with the send-trigger.

Config files are dispalyed correctly again and not only the signature files.

Logbook data is display even, if data logger has no data files in the system.

Duplicate and overlapping data entries are better and more convinient to handle now.

Many minor bugfixes in data exports, data imports and dynamic-graph-xy.

We added features to AmmonitConnect.

Minor bugfixes in data exports and user interface.

AmmonitConnect is supported by AmmonitOR now.

Data export: External recipients (ftp, scp, sftp) can be modifed from the level of export edit, they don't require additional url and view.

Minor bugfixes in data exports, login, premium, logger connections and user interface.

Data export supports SFTP transmission.

Data export: In the past it could happen that files were not send if the data logger was not Meteo-40 and had no premium subscription. This bug is solved.

In data file section the files can be easily downloaded by "download all files" button. Works for all file types.

Minor bugfixes in data exports.

Minor bugfixes to data download, timeline, premium, measurement data view and evaluation list view.

TOA5 export format has a possibility to change the header format now.

SCP delivery type of export is added.

Perfromance of export page is improved.

Sorting of columns is possible also in new exports, not only in existing ones.

Exports mechanics is completly re-newed, resulting in a better performance of a feature.

All data file types have a calendar view, instead of a long list of files. File summary is additionally being displayed

Data Snapshots display all values instead of just ones being present in config.

Many new evaluation types are supported, i.e. electrical conductivity or water content.

API support empty characters in file names.

Connection graph works better with a time-zone changes.

New Meteo-40 column "Date/time last" is being supported.

Minor bugfixes to plots, reports, completeness, premium and connection alarms.

Secondary and tertiary files are no longer mixed up with raw csv files.

Data reimport warning is being displayed again.

Picking dates in user interface clearly shows the timespan of the data now.

General bugfixes to overlapping files, exports, reports, permium functionality and imports.

FTP export is repaired.

Completeness values are now refreshed by manual activation/deactivation of files.

Connection log handles the timezone differences better.

General bugfixes to data exports, dynamic XY plot, plots, API and premium functionality.

Performance improvements to data exports and data imports.

Tunnel links are reintroduced to device list of project.

Dynamic XY plot allows saving the default evaluations for future display.

Premium calendars are properly displayed for example projects.

Logger status is automatically refreshed even if data has not arrived.

Journal entries are now possible to be downloaded as csv file.

Completeness can be requested via API.

General bugfixes to evaluations, data exports, dynamic XY plot, API and mast image.

Performance improvements.

General bugfixes to premium functionality, transactions, raw data files, import process.

Data Snapshots support system status values now.

New evaluations: variance, skewness, kurtosis.

Week's Review, EPE export, transaction and purchase order download, voucher, logger status, secondary and tertiary files improvements and general bugfixes.

Rework of device overview layout. Project and device colors do have meaning. The device status is customizable.

Project detail does not contain any longer redundant information.

Device detail view design is reworked and contains only device related information.

More information about import status of data files in Data files section.

Premium: Pre-payment of premium months in the future is possible now.

Premium: Pre-payed data months can be cancelled as long they lay in the future.

Premium: Dynamic XY graph is a free feature.

Week's Review is customizable.

Bugfixes in monthly profile and data export format EPE.

Dynamic plot can be used with evaluators from ZephIR connected to Meteo-40 logger.

Premium calendars are now properly displayed on device page.

User can remove himself from the project using settings section.

General bugfixes to dynamic plot, reports, purchase process, data exports, filters, connection log.

Multiple bugfixes in signature file upload.

Update purchase order message.

Bugfixes in XY difference graph.

Added more detail information to credit account. The whole purchase process is improved. Every purchase order is a pre-payment request.

Renamed all "data loggers" to "devices" to provide long time consistence and to support more devices than data loggers.

Bugfixes in Band graph, Correlation occurence plot and turbulence intensity.

Signiture files are sent by Meteo-40 will be saved and are downloadable in detail view of datafiles.

Performance improvements on Premium data logger list.

A first steps guide is added to the dashboard.

Minor bugfixes for premium logger list, band and average graph.

General bugfixes to data exports, credit account, band graph and xy-difference plot.

User centered UI design. User is able to see from every view as whom he is logged in and which permission he/she has for the current project the user is working with.

Introduced premium features. To use premium features you have to buy Credits. Basic features like monitoring and archiving are still for free.

Premium features are:

Meteo-40 data files have an expiration date. Data gets imported and expires after 3 months (The data files are saved on the server and are always download-able). If you spend Credits for the related time period the data will be reimported and stays forever in the database. Files from other devices are completely blocked for import unless the premium was bought.

Solar report is new available report format.

Project overview is now a list view.

New landing page called dashboard.

New plots:

Minor bugfixes in Weeks Review, Reports, Exports, Plots, API and UI.

General bugfixes to import, dynamic plot, week's review page and statistics pages.

Add support for secondary and tertiary statistics files coming from Meteo-40 data loggers.

CSV, Excel, Raw text, TOA5 and MGM exports have possibility to round decimal places now.

General bugfixes to import, gust data, reports and week's review page.

Journal section has a possibility of adding comments now.

Filter has a subscribers option, where the email subscribers can be chosen.

New logbook files will be listed from now on and avaliable for download.

Dynamic plot fixes including more consistent browsing by date and better support of the select boxes.

Export files name can be changed while editing export.

General bugfixes to reports, data exports, dynamic plot and data files page.

Vertical wind speed configuration overrides are now possible.

API provides the export list and it is possible to download export files via API.

Project admin has a possibility of moving the logger to another project.

Journal page is added, where user can track all important changes to the loggers within the project.

Dynamic XY plot improvements, bugfixes. Added backward and forward buttons to jump between periods.

Dynamic XY plot is added to the graphical analysis tool collection.

Meteo-40: Gust data files can be correctly imported.

Logbook: Interactive search field for logbook content.

Meteo-40: Gust data files and full config data files are downloadable in data files section.

Minor bugfixes in data export.

Improved error messages for data file import.

Better detection of overlapping data files. If just one entry is overlapping due to config changes in Meteo-40, both entries will be deleted.

Data Export: AmmonitOR supports TOA5 Format.

Config page and plots display Value statistic.

Access confirmation emails don't provide any broken links.

API: Upload type of data files will be sent as well.

Sending test data to an AmmonitOR project will create the data logger if it does not exist already.

Import of data files is improved.

Import of big number of data files no longer causes creation of duplicate sensors.

Wind direction evaluations are enabled for usage with monthly profile.

CSV export provides space as a seperator.

Data logger widgets show offline sign while data logger is not connected to tunnel.

Sorting of table columns of project detail view is now possible.

General bugfixes to configs, file import, calendar views, Zephir sensors compatibility.

Config list view has a separate table for deactivated configs now.

Guest users can no longer view statistics pages.

Data avaliability plot targeted for remote sensors is introduced.

General bug fixes to widgets, logbook, exports.

AmmonitOR zeroes the solar evaluations when negative channel values are present, while overriding the config by user.

Rest API is intruduced to AmmonitOR. It is possible to access detail project and data logger informations as well as download data logger files through 3rd party application.

Data avaliability plot.

General bug fixes to data export, plots and UI.

AmmonitOR runs now under Debian 8.0 (Jessie) system instead of Debian 7.0 (Wheezy).

Better support of AQS files.

AQS and Zephir300 configuration take no longer unnecessary file period into account.

Power curve measurement plots can be again compared with database wind turbines.

Exports give possibility of setting a custom order of columns using a drag-and-drop.

Exports give possibility of formatting the files header.

EPE export allows choosing wind speed evaluations.

Export cannot be sent beyond current date.

Export log provides a valid tirgger for sending export.

Activation and disactivation of evaluations is now more user friendly.

Measurement data page column order is the same as in CSV data file now.

AQS data import's upload form was not allowing to select files and prevented import.

Measurement data view displays the year information above the table.

In several places the data logger firmware was not displayed as latest version.

Some detailed reports were not generated, because of a bug in turbulence intensity plot.

Data logger widget shows a more informative message, if the needed evaluation is available.

Minor bug fixes in reports generation.

Added AmmonitOR icon to the right uppper corner of webpage.

SODAR AQ510 is supported by AmmonitOR.

Zephir import with gaps and 10min averages were refused in the past. AmmonitOR is now able to detect gaps.

Measurement data page had sometimes issues with displaying the correct end date and time of the day.

All power evaluations ("active_power") can be grouped as evaluation pair. Before it was only possible for "active_power Total".

Removed obsolete button "Access data logger via tunnel" for Meteo32 and Remote Sensors in Connections table view.

Several minor issues in power curve plot, energy yield plot are solved.

Performance and stability changes to server.

Minor problems are solved in energy yield plot and statistic page of average tables.

Reports are able to display all evaluations again and not only ones, who are listed in config (Temporarily issue since 2016-02).

Table of statistics allows different statistic types and average periods.

Power Curve graph shows additionally the power coefficent curve.

Several minor bugfixes in reports and plots.

Project creation page provides some help text.

Table of data files is now sortable.

Histogram plot is able to display negativ ranges as well.

Fixed a problem with displaying data files in calendar view in right order.

Reports: Add better handling for large tables with many rows.

Reports: If data is missing in reports due to communication issues on data logger side, the report generation will wait until 2 days. After the report will be generated.

Reduced query load for server administration pages.

Search field on project overview is sensitive for data logger serials and project keys.

Completeness calendar highlights row and column if mouse hovers over.

Analysis table for wind speed evaluations is added. It displays average, completeness, calms, entries and turbulence intensity for chosen month or year.

The email subject of data exports is editable.

Week's Review: Fixed a problem with showing the connections of the current day.

Connection Log: Added time information to mouse over banner.

Fixed a problem in Zephir data import.

XY plot: Percipitation and Sum had no unit.

Data logger widget: Resolved an issue in the greyout mechanics, when data seems to be old.

Added some performance optimisations for logger detail page, configuration list, evaluation list, photos and data export list.

Added a display option for looking at data files raw content.

Data file download uses the original filename.

Fixed data logger delete function.

Fixed: Connection log was temporarily not available in Google's Chrome.

Data files are now organised by month with an index page to jump to a specific month.

Data files list page has been made faster.

Data logger name, type and coordinates are taken from the latest configuration file, but it is possible to override them in AmmonitOR. Leave the fields open and AmmonitOR will display the configuration values.

Configuration list is in reverse order now. The lastest entry is first for better readability.

Fixed a problem with data file zip download.

Fixed data logger overview it shows either the from CSV imported values or the latest data snapshot if it is newer.

Fixed connection log issues when using Mozilla Firefox.

Increased maximum data file upload size to 4MB (uncompressed)

Fixed a problem with zipped EPE exports

Larger CSV exports are now possible with a pickup-delivery system.

Timezone support added to connection log, allowing connections to be shown in local time.

Data tables now have link to relevant data file.

Data tables now have units and relevant configuration information.

Warnings are now clearer on data file detail page.

Older files from Zephir remote sensors can now be processed.

Added server administration tool to conveniently restore system from backup.

Speed and performance improvements on a number of pages.

Fixed a problem that arose when configuration overrides were created for solar irradiance evalautions.

Missing coordinates are now allowed in Meteo-40 data files.

Data snapshot overview page now handles new/removed evaluations cleanly.

Improved error message when unrecognised ZPH data files are uploaded (Zephir).

Page for creating and updating raw data exports is now working again.

Power curve measurement report is now available.

Export email of original data file had no attachment.

Power curve report is disabled temporarily. In next release the report will be available again.

Bug fixes in import module.

Several major and minor bug fixes.

Support for Zephir300 devices: Zephir300 CSV data files (10 minute averaged) can be uploaded (ftp or manually) now; Full integration into AmmonitOR.

New data import experience: Much better feedback about uploaded data files; Improved data upload performance.

Richer data file overview: More information about data file; Better original data file view; Improved handling of data files (Delete all invalid files with one click).

New timeline feature: See everything that happens in your AmmonitOR project over time in one view.

New report period: Bimonthly.

Week's review: time range is now adjustable (7 days, 14 days, 21 days and 28 days).

Better experience with evaluation selection in several plots.

Bug fixes in Wind power density and energy yield plot.

Bug fix in configuration overwrite. AmmonitOR refused to overwrite values of pyranometer evaluations. As result no values were displayed.

Several major and minor bug fixes.

Confusing presentation of coordinates are resolved.

Photos have more display options. Coordinates for documentation, gallery for documentation and photo timeline to display monitoring photos send by data logger. The photo timeline will have more display options in future.

Fixed bugs in plot wind power density and energy yield.

Weather station support is disabled, because the external weather api is no longer reliable.

Boom orientation is added to the sensor desciption and will be displayed when necessarpy.

Connection log now displays exact start and finish times for uploading connections, in case they take longer than a few seconds. This should be useful for monitoring slow uploads (eg via satellite).

Data file completeness calendar now repeats its header for every year, useful for long term projects.

Data file completeness calendar now shows latest entries at the top.

Bug fix: Solar irradiance formula was not found when adding a new evaluation.

Changed MGM summary export format to allow missing air density sensors, and removed temperature height.

Data export calendar was only displaying attempted deliveries, it now displays whether or not an export was successfully sent.

Data export filename and email subject are improved with more details about format and period.

Extension of MGM export formats with summary file format (S) is added.

Evaluation completeness analysis is now able to correctly handle overlapping configuration periods.

Minor bug fixes: Daily and monthly profile plots can now handle doubled evaluations.

Turkish MGM data export now allows users to choose which height evaluations are used for the D file. The evaluation with the nearest height is chosen.

Display configuration on data file page if available (METEO-32 data loggers).

New regulation for Turkish MGM data export filenames e.g. 120001_20141120_R.txt.

Improvements in filter for overlapping data files.

Report changes in standard, detailed, compact. Added information of used wind vane in shadow zone plot. Restored missing plots speed direction bar and speed direction dots. Keep in mind that evaluation pairs a necessary for these plots.

Minor bug fixes: calm analysis, power curve plot.

Periodic data snapshots and monitoring photos can now be uploaded from Meteo-40 dataloggers.

Project period is more prominent.

Minor bug fixes: monthly profile, turbulence intensity, wind power density, long term comparison.

Status and photo upload via data logger Meteo-40 is available. New menu point for photo upload "data snapshot".

Report regeneration is improved. Every single report is selectable for regeneration.

We fixed a problem concerning to display data completeness.

Logbook calendar has a legend.

Example projects get new permissions. Read and download permissions are available.

Minor bug fix: Shadow zone plot, longer term comparison profile, monthly profile, histogram

Minor bug fix: SMTP import server.

Minor bug fix: Shadow zone plot.

Minor bug fixes, increasing processing stability.

Wind turbine example data are available for plots.

Sidebar menu is cleaned up and restructered.

New plot: Wind power density. Plot wind power density in a polar view.

Log book feature provides a calendar view for entries.

Project color can be chosen by user.

Minor performance improvements.

AmmonitOR is ready for full configuration file upload of Meteo-40.

New example project for power curve measurement is added with 13 example turbines. The data of example turbines are available for every project.

Minor bug fixes in plots energy yield estimated, wind speed, long-term-comparison profile.

Major performance improvements.

New plot selection menu to make it easier to find the plot you need.

New plot: Histogram. Generic histogram of any evaluation.

New plot: Energy yield. Compare your measurements to your power curves in the toolbox.

New plot: Estimated energy yield. Compare your measurements to your power curves in the toolbox.

New plot: Shadow zone can now be shown on cartesian axes.

Improved photo documentation, including direction markup and cardinal points view.

Removed error measurement exclusion from filters for performance reasons, will be replaced with new filter framework in the near future.

Added ability to sign data exports without encryption.

Raw data files can now be viewed online in table format.

Projects now have unique colours to help quickly identify which project is active.

Numerous smaller bug fixes.

General stability improvements and help pages are accessable again.

New, more readable URL addresses, old bookmarks should redirect appropriately.

New toolbox for adding tubine power curve information.

New calendar view for data export logs.

New power curve measurement report.

New plot for calms analysis.

New plot for power curve.

New plots for energy yield.

The wind direction and wind speed plots now support up to 144 sectors (2.5°).

New information is provided on each plot: what it represents, why it might be useful and how to read it.

A "connection alarm" can be sent for each connection as it arrives, not just for when it is missing.

New users can create new accounts themselves online, through a link on the login page ("sign up").

The weekly report subscriptions always start on monday for consistency.

Speed direction bar has new option for showing a table with weibull's a and k for given sectors.

Monthly profile plot supports flexible start and end dates.

You can now view wind direction evaluations in a monthly profile plot.

Daily profile plot has new option to scale axes for better comparison.

Stability improvements for report generation, wind speed plot and daily profile plot.

Added new permission level. The Configurater can change data handling and management, but cannot download data or change project user permissions.

Minor but necessary improvements for data export (FTP settings), daily-profile, wind-speed graph and reports.

Added a button to view details of a related configuration file.

Minor but necessary improvements for data export, filters, XY-graph, wind-speed graph and long-term-comparison profile.

In reports the permissions of project users are inherited.

Tunnel connections over 24 hours are displayed correctly in connection log.

Meteo-40 communication configuration is displayed by configuration detail page.

General improvements for XY-graph

General improvements for XY-graph.

Minor fixes in UI.

Project permission system are refactored. The new permissions are: Admin - Full permissions, User - Can change configuration, but cannot manage users, Viewer - Can see and download data, but cannot make changes, Guest - Can see plots and summaries, but cannot download data.

Logbook entries of data logger Meteo-40 are automatically uploaded and displayed.

Option for showing public weather information in XY-graph and map, if data logger has coordinates.

Fixed problem where Forgot-Password email wasn't send, if the user forgot to set a valid password during the first week account validation time.

General improvements for the plots XY-graph and "Long time comparison"-graph.

Fixed problem with "earlier connection" button at connection log page.

Project data logger overview shows only active evaluations.

Delete button for incident log was added.

The documentation was updated.

Minor but necessary UI fixes for previous release.

Export original data files, with the normal export features (eg grouped by month, zipped, encryption, automatic delivery via email and ftp).

New evaluation pairs. Allows pairs of evaluations (eg Speed/Direction) to be defined. These are then used for various plots, exports and reports.

New data logger overview, showing most important details for each data logger to quickly identify any possible issues.

New plots for long term comparison profile: wind speed relationship and turbulance intensity trend.

French language now available.

New, cleaner configuration detail page.

Clicking on a plot in the All Evaluations (7 days) overview allows the plot's parameters to be edited.

Successful SCP upload tests from Meteo-40 data loggers are recorded and displayed alongside other data logger connections in the connection log.

Fixed problem where plots were not visible with Internet Explorer 8 (not officially supported).

Speed up for All Evaluations (7-days) page.

Speed up for individual plots.

Improved layout for data logger configuration detail page.

Wind direction evaluations cannot be recalculated from channels, as they require a vector average. A new evaluation can now be created to add an offset to an existing evluation, calculated by the data logger using vector average.

Only files with statistic intervals of or greater than 1 minute are accepted.

Coordinates entered in Meteo-40 data loggers (with latest firmware) are imported.

Data loggers are listed as a table in the project overview.

The data logger under the mouse cursor is highlighted in the map in project overview.

Infrastructure improvements, using new server software for better performance.

Simpler configuration for data exports.

Custom field selection for data export.

New fields for data exports: data logger serial, project name, data logger name, original data filename.

Custom date format for data exports.

New data export format for projects in Brazil: DEA 10/13 (Empresa de Pesquisa Energética, Brasil).

New connection alarm feature for all users: Let yourself be notified if no connection has been made from the data logger for a certain time.

Upgrading weibull parameter estimation to use Modified Maximum Likelihood Estimation, a very accurate method for estimating weibull parameters.

Added a tool to help find and remove duplicate and overlapping data files.

Plots can now be downloaded in high resolution PDF format for closer inspection and printing.

Points in wind direction XY plots are now joined, lines wrap around 360°-0° intelligently.

A short connection log now appears at the top of the "All evaluations (7 days)" page.

Identical reports have been removed and now cannot be accidentally created.

Days with too many data are now shown clearly as blue in the calendar, use the duplicate/overlapping data file tool to resolve these issues.

Fixed MS Excel report to format values and dates as data, not text.

Small changes to data export UI.

Removed "undo" option from project deletion, projects are now deleted instantly and permanently.

Added incident logs for beta testers, to allow certain data to be manually excluded.

Improved formatting in MS Excel export, including frozen panes, clearer header and better column widths.

Connection log now shows weekdays/weekends in background.

Added a new plot showing a bar chart for visualization of sunshine duration.

Available reports can be marked for regeneration by admin users.

New connection alarm feature for beta testers.

AmmonitOR-only evaluations are now also included in data export.

Added a new page showing plots for all evaluations over the last week.

Added a new date/time picker to help choose dates in forms.

Reports are now automatically delivered by email when available.

Disallowed two data loggers with the same serial in a single project.

A warning is displayed for data exports that might not be possible (eg very large MS Excel files).

More and clearer information on the data export log page.

The sun status evaluation detail page now shows its sum.

XY plot can now show sun status sum.

Email and SCP connections are now more visible on connection log page.

All months are now available in the table of averages.

FTP passwords no longer need to be reentered for data exports.

Fixed connections problems for data imports via SCP with Meteo-40.

Fixed problem with images in documentation.

Added a predictable channel ordering for data export.

Log files for data exports are now available.

Data file deletion now possible.

Release notes are now available in the documentation.

Software libraries updated.

Plot enhancements.

Report enhancements.

Fix minor problems.

Fix problem with report generation.

Fixes for different plots.

Fix problem with truncated encrypted files.

Support sun status on analog inputs for METEO-32.

Fix problem with unavailable export options..

Signing and Encryption support with GnuPG.

Graphic display of tunnel connections from your Meteo-40 data logger.

Online support form, providing the Ammonit support team with sufficient access and information

Allow a user to unsubscribe from email alerts

New plot: "Shadow Zone Plot"

New plot: "Turbulence Intensity"

New plot: "Daily Profile"

New plot: "Monthly Profile"

New plot: "Turbulence Intensity Polar"

New plot: "Correlation Plot"

New plot: "Sunshine Hours Histogram"

New plot: "Overlay Graph"

The new Ammonit Data Logger Meteo-40 is supported now!

The data access should be faster.

Individual data entries cannot be marked anymore, instead use a filter.

A series of small usability improvements and bug fixes has been applied.

New data upload page, to upload old data directly from the browser.

New METEO-32 value calculator, to help interpret data sent from a METEO-32 data logger.

Date based pagination for data page.

Data can now be exported as a ZIP file of daily CSV files for any given time period.

Extensive review of data integrity.

Axes in XY charts are scaled identically for all identical units.

New list of all data loggers in all projects.

Series of small usability improvements.

New data calendar view for each data logger, to recognise missing data.

CSV Export now uses your custom slopes and offsets.

Bug fix: Anemometer channels (s1, s2, s3, s4) previously did not take into account the different unit in the offset. This did not change the values, unless a custom offset was set in AmmonitOR. Old data has been automatically converted and new data will be converted when imported. If a custom offset was used, the data will be corrected, we have informed all affected users directly.

New page for Frequently Asked Questions in manual.

Series of small usability improvements.

Reports are now include high resolution charts.

Raw data is now shown in data view.

Data view popup now shows complete data for a given measurand.

Messages now link to related data entries.

extended channels (v1, v2, v3, v4, c1, c2) now have their raw values converted, and units provided. Old data has been automatically converted and new data will be converted when imported.

Past reports are now also listed.

Several minor improvements for stability.

You can subscribe to monthly data reports in PDF format, sent to your email address.

All plots can now be downloaded and printed in PDF format.

Photos for each data logger can be uploaded.

You can export and download your data as a CSV file.

The data import is now more flexible (eg using data from CALLaLOG).

Your data logger data is now stored in its own separate datastore for security and speed.

Our automatic testing has grown to cover all aspects of AmmonitOR.

A number of small usability changes have been made (see eg the data entry list!).

A number of small fixes and tweaks.